Technical Information:
The single-mode and multimode MPO products are multi-fiber connectors used in high-density backplane and Printed Circuit Board(PCB) applications in data and telecommunications system. The MPO connector offers up to 12 times the density of standard connectors, providing significant space and cost savings. MPO patch cord utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO can be mass terminated in combination of 4,8,12 or 24 fibers. MTP®/MPO multi-fiber trunk cables are usually in mini-round cables and ribbon cables, with fanout kits broken down into 2~24 fiber 0.9mm or 2.0mm tails with connector LC, SC, ST, FC, etc. Cable total length, fanout length, connector type are customized.
Features:
► 4, 6, 8 and 12-fiber count available;
► Save duct space and installation time;
► 900um, or 2mm fan-out tube;
► Easy to use;
► Jacketed ribbon cables, bare ribbons, or distribution cables.
Application:
► Data Communication;
► Telecommunication;
► Long haul networks;
► CATV networks;
► Building interconnections.
Specifications and Dimensions:
Characteristics |
Unit |
Value/Performance |
|
Fiber Count |
- |
4, 6, 8 or 12 |
|
Cable Type |
- |
Bare ribbon, jacket ribbon or distribution cable |
|
Optical Performance |
- |
See corresponding patch cord data sheets |
|
Fan-out Diameter |
- |
900um |
2mm |
Operating Temperature |
℃ |
0 ~ +70°C |
-20 ~ +70°C |
Storage Temperature |
℃ |
-5 ~ +70°C |
-40 ~ +70°C |
Tensile strength |
kg |
>2.5kg |
>6.8kg |
Parameter |
Single-mode |
Multi-mode |
|||
Basic |
Fiber connector |
FC, SC, LC, ST, MU, MTRJ, MPO |
|||
Ferrule End-face |
PC |
UPC |
APC |
UPC |
|
Insertion Loss |
≤0.2dB |
≤0.2dB |
≤0.3dB |
≤0.3bB |
|
Return Loss |
≥50dB |
≥55dB |
≥60dB |
≥35dB |
|
Ceramic Ferrule Specification |
125.5um concentricity deviations: |
127um concentricity deviations:<=3um |
|||
Suitable Fiber |
9/125um |
50/125um,62.5/125um |
|||
End-face Geometry |
Radius of Curvature |
7~25mm |
5~12mm |
N/A |
|
Fiber Protrusion |
≤50nm |
≤100nm |
N/A |
||
Fiber Under Cut |
≤100nm |
≤100nm |
N/A |
||
Apex offset |
≤50um |
The Basic Division of MTP® Connectors:
Type and Color Code Connectors |
Insertion |
Optical |
Operating |
Single-mode MTP® Elite® Connector |
0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Single-mode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Multimode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3 |
> 20 dB (0°Flat Polished)2,3 |
-40℃ to 75℃ |
1 IL test according to IEC 61300-3-4; |
Recommended buffer fiber and color-coded connectors:
Cable Type |
Single-mode MTP® Elite® |
Single-mode MTP® Standard |
Multimode MTP® Elite® |
Multimode MTP® Standard |
Bare Ribbon |
Mustard Color |
Green Color |
Aqua Color |
Beige Color |
Flat ribbon Cordage | ||||
Cable Ø 2.0mm | ||||
Cable Ø 3.0mm | ||||
Cable Ø 3.6mm | ||||
Cable Ø 4.5mm | ||||
Cable Ø 5.0mm | ||||
Cable Ø 5.5mm |
Typical Applications and Wire Map:
Ordering Information:
Product Description |
MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A 1 2 3 4 5 6 7 8 9 |
1 - Connector A |
MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish; |
2 - Connector B |
LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC; |
3 - Fiber Mode |
OM1, OM2, OM3, OM4, OS2, G657A1 |
4 - Fiber Count&Type |
12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable |
5 - Breakout Type |
B2.0: 2.0 fan-out with splitter kit. |
6 - Length |
1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc. |
7 - Cable Jacket Materials |
LSZH/OFNP/OFNR |
8 - Cable Jacket Color |
Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM). |
9 - Polarity |
A: Type A; B: Type B; C: Type C. |