Technical Information:
ALTEK's MPO/MTP® Cassettes are enclosed units that contain 12/24 fiber factory terminated breakout cables inside, serving to transition ribbon cables terminated with MPO/MTP® connector to the more common LC or SC interface used on the transceiver terminal equipment. This kind of cassette provides a quick and efficient way to deploy up to 24 LC or 12 SC fiber ports in a single module. ALTEK's MTP Cassette Modules are fitted with 12 Fibers and have LC adapters on the front side and MTP at the rear. This cassette is made into smaller size and can be deployed in an ODF for higher density main distribution area (MDA) to the equipment distribution area (EDA) in the data center.
Basic characteristics:
► MTP®-12 to LC UPC Duplex 12 Fibers MPO/MTP Cassette, Single Mode, Polarity A;
► 1RU Rack Mount FMT Fiber Enclosure Unloaded;
► One-Click Cleaner for LC/MU 1.25mm Ferrules;
► Reduce installation time and cost;
► Available with 12 fiber and 24 fiber configurations for SC, LC connectors;
► Standard and customized made are available.
Details:
Fiber Count | 12 |
Fiber Type |
OS2 9/125μm SMF |
Front Connector Type |
6 LC Duplex |
Rear Connector Type |
1 MTP® Male |
MTP Adapter |
Key up to Key down |
Performance Level |
Laser optimized |
Insertion Loss |
MTP≤0.35dB,LC≤0.3dB |
Return Loss |
MTP≥60dB,LC≥50dB |
RoHS Compliance |
Applicability |
Dimension(HxWxD) |
1.38''x4.29''x4.64''(35x109x118mm) |
Operating |
0℃ to +70℃ |
Storage and |
-40℃ to +75℃ |
Application:
► MPO/MTP® cassettes are used for interconnector or cross connector for 10G connectivity if the distance between two devices is too long.
General Connector Specification:
Parameter | Single-mode |
Multi-mode |
|||
Basic |
Fiber connector |
FC, SC, LC, ST, MU, MTRJ, MPO |
|||
Ferrule End-face |
PC |
UPC |
APC |
UPC |
|
Insertion Loss |
≤0.2dB |
≤0.2dB |
≤0.3dB |
≤0.3bB |
|
Return Loss |
≥50dB |
≥55dB |
≥60dB |
≥35dB |
|
Ceramic Ferrule Specification |
125.5um concentricity deviations: |
127um concentricity deviations:<=3um |
|||
Suitable Fiber |
9/125um |
50/125um,62.5/125um |
|||
End-face Geometry |
Radius of Curvature |
7~25mm |
5~12mm |
N/A |
|
Fiber Protrusion |
≤50nm |
≤100nm |
N/A |
||
Fiber Under Cut |
≤100nm |
≤100nm |
N/A |
||
Apex offset |
≤50um |
||||
Mechanical |
Exchangeability |
≤0.2dB |
|||
Salt Spray |
≤0.1dB |
||||
Drop |
≤0.2dB(1.5M, 5 drops) |
||||
Vibration |
IL ≤0.2dB(550Hz, 1.5mm) |
||||
Repeatability |
≤ 0.1dB(1000 times) |
||||
Durability |
> 1000 times |
||||
Operating Temperature |
-40℃ ~ +85℃ |
The basic division of MTP® connectors:
Type and Color Code Connectors |
Insertion |
Optical |
Operating |
Single-mode MTP® Elite® Connector |
0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Single-mode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 |
> 60 dB (8°Angle Polished)2 |
-40℃ to 75℃ |
Multimode MTP® Standard Connector |
0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3 |
> 20 dB (0°Flat Polished)2,3 |
-40℃ to 75℃ |
1 IL test according to IEC 61300-3-4; |
High Density MTP®/MPO Cabling System In Dada Center:
Ordering Guide:
Product Description |
MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A 1 2 3 4 5 6 7 8 9 |
1 - Connector A |
MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish; |
2 - Connector B |
LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC; |
3 - Fiber Mode |
OM1, OM2, OM3, OM4, OS2, G657A1 |
4 - Fiber Count&Type |
12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable |
5 - Breakout Type |
B2.0: 2.0 fan-out with splitter kit. |
6 - Length |
1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc. |
7 - Cable Jacket Materials |
LSZH,OFNP,OFNR,PVC |
8 - Cable Jacket Color |
Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM). |
9 - Polarity |
A: Type A; B: Type B; C: Type C. |